BM TRADA Q-Mark certified fire door inspections
Fire door inspections & surveys
SIMETRIA carries out fire door inspections and surveys for PBSA, BTR, hotel and residential buildings across the UK, checking every door against the BM TRADA 23-point checklist.
Each survey gives you an asset-level defect report, photographs, a remediate-or-replace decision for every door, costs and priorities, and digital Golden Thread records.
Book a Fire Door Survey
100
,000
Fire doors manufactured p.a.
4
,
734
Scale - fire doors remediated
225
New fire door sets per lorry
1
Digital Golden Thread
BM TRADA Q-Mark Fire Door Maintenance
Certified inspection, repair and maintenance of fire doors, ensuring continued compliance, performance and safety throughout their service life.
BM TRADA certification
BM TRADA Q-Mark Fire Door Installation
Certified installation of fire door sets to approved standards and manufacturer specifications, ensuring consistent compliance and performance.
BM TRADA certification
BM TRADA Q-Mark Fire Door Compartmentation
Certification of passive fire protection systems, maintaining fire-resisting compartmention and preventing the spread of fire and smoke.
BM TRADA certification
Fire Door Inspection & Survey Services
FIRE DOOR
INSPECTIONS & SURVEYS
A Simetria fire door survey records the condition of every door, frame, seal, closer, hinge and glazing, then sets out what to remediate, what to replace and what it will cost, giving Responsible Persons, operators and asset managers one clear plan across PBSA, BTR, hotel and residential portfolios.
/
01
Pre-survey review
We review your fire risk assessment, door schedules, previous surveys and plans so the inspection focuses on the doors and risks that matter most.



/
02
23-point inspection
Every door is checked against the BM TRADA 23-point checklist: leaf, frame, gaps, intumescent and smoke seals, self-closer, hinges, ironmongery, glazing and signage.



/
03
Asset tagging & photos
Each door gets a unique asset ID, location, type, fire rating and photographs, creating the baseline for your digital Golden Thread record.



/
04
Defect & compliance report
A door-by-door report rates each defect, its risk and the required action, with a summary for the Responsible Person and fire risk assessor.



/
05
Remediate or replace
Following our remediation-first approach, we recommend repair wherever the evidence supports it and replacement only where a door cannot compliantly be brought back.



/
06
Costed programme
Every survey ends with a costed, prioritised scope of works and programme, ready for budget approval and delivered by our own certified teams if you choose.



Our Process
CERTIFIED FIRE DOOR MANUFACTURING
Our premium certified fire door sets are factory-finished - painted, veneered, laminated or solid wood - and pre hung ready for swift installation.
Discuss Your Project
European
Certified Fire Door Manufacturing
Our European manufacturing partners produce independently EN Standard certified, factory-finished fire door sets, developed in partnership with SIMETRIA, specifically for the UK and European markets.
These are engineered for fast, compliant installation across residential, PBSA, BTR and hotel projects.
Five year service and audit package
UK CERTIFIED FACTORY FINISHED DOOR SETS
PRE-HUNG FIRE DOOR SETS
Factory finish - paint, laminate or veneer
225 COMPLETE FIRE DOOR SETS PER LORRY
Fire door compliance projects
VIEW ALL FIRE COMPLIANCE PROJECTS
Selected fire door and passive fire projects across PBSA, BTR and residential assets covering surveys, remediation, replacement, compartmentation and long-term compliance.
All Fire Door Compliance Projects
want to know more?
Fire Door Compliance Team
We are ready to assist you.
Good afternoon, how can we help with your fire doors compliance?
Chat with us
A fire door inspection checks that a fire door and its frame, seals, self-closer, hinges, glazing and ironmongery will perform as intended in a fire.
It identifies defects such as excessive gaps, damaged or missing intumescent and smoke seals and doors that fail to self-close.
Simetria inspects every door against the BM TRADA 23-point checklist and records the results at asset level.
The terms are often used interchangeably. A routine inspection checks doors are working, while a fire door survey is a full condition assessment of every door with a defect report, recommended actions and costs.
Simetria surveys give you both: an evidenced compliance record and a costed plan for remediation or replacement.
Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person must keep fire doors in efficient working order and good repair.
In England, the Fire Safety (England) Regulations 2022 require residential buildings over 11 metres to check communal fire doors at least every three months and flat entrance doors at least every 12 months on a best-endeavours basis.
A professional survey is the most reliable way to evidence that duty, and is often requested by fire risk assessors, insurers and lenders.
Common defects include doors failing to self-close, damaged or missing intumescent and smoke seals, excessive gaps, defective hinges or closers, unsuitable ironmongery, damaged leaves or frames, inappropriate alterations and damaged glazing.
Most can be remediated rather than replaced, so our surveys record the simplest compliant fix for each defect alongside its risk rating.
BM TRADA Q-Mark is an independent third-party certification scheme providing assurance that certified services are delivered against defined scheme requirements and are independently assessed.
Simetria operates under applicable BM TRADA Q-Mark certified procedures for Fire Door Installation (STD 052), Fire Door Maintenance (STD 058) and Fire Stopping, supporting quality, competence and traceability across our compliance works.
Inspection frequency depends on the building, door type, usage and fire risk assessment.
In multi-occupied residential buildings over 11 metres in England, communal fire doors must be checked at least every three months and flat entrance doors at least every 12 months. High-traffic doors in PBSA, BTR and hotels often need more frequent checks.
Simetria provides one-off surveys and structured inspection programmes for single buildings and multi-site portfolios.
Survey duration depends on the number of doors and access to flats, rooms and plant areas. We plan inspections around residents and building operations to minimise disruption.
Every survey ends with a door-by-door report and a costed programme for any remediation or replacement.
Survey cost depends on the number of doors, building type and access. Larger buildings and portfolios cost less per door, and we provide a fixed quote before work starts.
Across 10 recent Simetria projects in London and Manchester, the full package of survey, remediation or replacement, certification and digital records came to about £295 to £355 per door.
A digital, door-by-door report with asset IDs, locations, photographs, defects, risk ratings and the recommended action and cost for each door.
It starts your Golden Thread record and is updated as works and future inspections are completed.
The Golden Thread means maintaining accurate, accessible and up-to-date information about a building and its safety-critical assets throughout their lifecycle.
For fire doors, Simetria creates digital asset records showing condition, identified defects, completed works, photographs and supporting evidence, providing continuity from survey through ongoing maintenance and future compliance activity.
Responsibility depends on the building and applicable legislation. Under the Regulatory Reform (Fire Safety) Order 2005, the Responsible Person has duties for premises covered by the Order, while the Fire Safety Act 2021 clarified its application to flat entrance doors and relevant building elements in multi-occupied residential buildings.
Owners and managing parties should clearly establish responsibility and ensure identified defects are addressed by competent persons.
Fire door requirements sit within a wider legal framework including the Regulatory Reform (Fire Safety) Order 2005, Fire Safety Act 2021, Fire Safety (England) Regulations 2022 and, where relevant, the Building Safety Act 2022 and Building Regulations.
Requirements vary by building type and circumstances, so fire door management should be considered alongside the property's fire risk assessment and current statutory requirements.
Yes. Our BM TRADA Q-Mark certified teams remediate, replace and install fire doors, and our European manufacturing partners supply factory-finished certified door sets.
One partner from survey to sign-off means no gap between the report and the works, and one continuous digital record.














